Skip to main content

Tweet Shoes Tutorial

I love cheap white canvas shoes in the summer. They are comfortable and cheap and with a little craft time they can be oh so cute.

This tutorial is a bit harder than some of my others because it requires that you have a very steady painting hand. So if you are not great with the paint brush you might want to try out my other canvas shoe tutorial which is much easier.

Supplies
Canvas shoes (I bought mine from Walmart for $5.97)
Fabric Paint, color of your choice and black
Chartpak Ad Marker Blender Pen (with Zylene)
Fine tip paint brush and a flatter quarter inch brush
Tape
Laser Printer

  1. Print out the pattern below on a Laser Printer or copier. (Use the scale to make sure the print out is the correct size).  Note: the print out MUST BE FROM A LASER PRINTER OR COPIER TO WORK.


  2. Remove the shoe laces. Roughly cut out the patterns and tape in place on each shoe.


  3. In a WELL VENTILATED area, take the Chartpak maker and rub the back side to transfer the image to the shoe. You will have to go over the area several times, I rubbed each transfer for about a minute.





    Before you remove the pattern, pick up a corner and see how well the transfer is going. Depending on pressure and saturation your transfer might take more than a minute.


  4. Using your fine tip brush, carefully start to fill in Tweet and bird. Set aside to dry.


  5. After the Tweet is dried, start to paint the outside of the word bubble. Paint up to the stitches going around the shoe and down to where the canvas and rubber meet.


  6. On the bird shoe paint the middle part of the shoe inside of the front and back stitches. Do one side of the shoe and let it dry. Repeat with the second side after the paint is dried.


  7. On the Tweet shoe, paint the heal area of the shoe. Set aside to dry.


  8. Using the black paint and the fine point brush, add the feet, eye and wing to the bird as shown:


  9. Using the same paint and brush add some definition to the Tweet as shown below:

Comments

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer