Skip to main content

Peacock Earring Tutorial


I can't go anywhere without seeing a pair of feather earrings. They seem to be really hot right now so I decided to whip up a pair. They are a very simple peacock feather pair, you should be able to get most of the supplies in your local craft store.

Supplies:
4 peacock eye feathers
Scissors
Hot Glue
1 Set of Wire Earring Hooks
2 Fold Over Crimp Ends
2 Jump Rings
Small Pliers (used for jewelry and delicate work)
  1. Take 2 of your peacock feathers and trim the wispy eyelash like ends off of the rounded top and cut off the stem about an inch below the “eye” (see fig. 1).

  2. Trim the two remaining feathers similar to the others, except you will be cropping closer to the eye, see fig. 3 for a reference.

  3. Use the glue gun and add a bead of glue down the spine of one of the trimmed eye only feathers. Glue this feather on top of one of the larger feathers (see fig. 3). Repeat this step with second set of feathers

  4. Place a small bit of glue to the very tip of the feather cluster on the front side and glue a fold over crimp bead to it. Make sure the font of the crimp bead is towards the front of the feathers.

    Note: This will not hold the feather in place, however it will help to steady the feather when you are closing the crimp ends.

  5. Using the pliers, fold down the crimp ends so they tightly fit the feathers. Repeat this step with the second set of feathers.

  6. Using the jump rings, attach the feather cluster to the earring wire.

Comments

  1. I LOVE the peacock earrings--so cute, so simple, yet just stunning!

    P.S. Since I just am loving your blog so much, I have awarded you the “Versatile Blogger Award”. Please stop by my blog to snatch it up and wear it proud on your blog! You deserve it! Congrats!

    Kellianne @ tinkeranniebelle.blogspot.com

    ReplyDelete
  2. Thank you so much for taking the time to make this tutorial for us! The earrings look fantastic!

    I just had to share your tutorial on my blog here:
    http://shelovestocraft.blogspot.com/2011/09/jewelry-tutorial-roundup.html

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer